Alteryx Woven Patch Analytics For All

Level up your existing Alteryx gear with this iron-on embroidered patch.

Patch Size - 2"

Instructions to apply are not included.  Please use instructions below:

1. Prepare the Surface:

   • Place the garment on a flat, heat-resistant surface like an ironing board. Ensure the area where you want to place the patch is clean and wrinkle-free.

2. Position the Patch:

   • Place the patch on the desired location with the adhesive side down (the back of the patch should be against the fabric).

3. Cover the Patch:

   • Place a thin cloth or a piece of parchment paper over the patch. This protects both the patch and the fabric from direct heat.

4. Set the Iron:

   • Preheat your iron to the hottest setting your fabric can tolerate. Ensure the steam function is turned off (dry heat is essential for proper adhesion).

5. Iron the Patch:

   • Press the iron firmly onto the covered patch for about 15-30 seconds. Apply steady pressure without moving the iron around.

6. Check Adherence:

   • Carefully lift the cloth or parchment paper to check if the patch has adhered to the fabric. If not, replace the cloth and iron again for an additional 10-15 seconds.

7. Secure the Edges:

   • Pay special attention to the edges of the patch. If needed, apply the iron to the edges for an extra 10 seconds to ensure they are firmly attached.

8. Cool Down:

   • Allow the patch and fabric to cool completely before handling. This helps set the adhesive and ensures a strong bond.

Tips:

• For extra security, you can sew around the edges of the patch after ironing.
• Always follow the care instructions on your garment's label to avoid damage during the ironing process.

Enjoy your newly adorned garment with your custom patch!

#AnalyticsForAll